Dial Analysis Table For Ars/Lcr; Description - NEC Aspire Series Networking Manual

Table of Contents

Advertisement

26-02 : Dial Analysis Table for ARS/LCR

Level:
IN

Description

Input Data
Networking
26-02 : Dial Analysis Table for ARS/LCR
Aspire S
Available.
Dial Analysis Tables increased from 200 to
400 with software 2.63+.
Use Program 26-02 : Dial Analysis Table for ARS/LCR to set pre-transaction tables for selecting
Automatic Route Selection (ARS).
Service Type 1 (Route to Trunk Group Number) - The number routes to a trunk group.
Service Type 2 (F-Route Selected) - The number is controlled by the F-Route table.
Dial Analysis Table Number
Item No.
01
Dial
02
Service Type
03
Additional Data / Service
Number
04
ARS Class of Service
05
Dial Treatment
Item
Dial Digits (16 digits maximum)
1-9, 0, *, #, or @ for wild character
1 = Route to Trunk Group
2 = Select F-Route Access
In Service Type 1: Select Trunk
Group Number (0-100, 0=no route)
F-Route Time Schedule Not Used =
0-500 (F-Route Table Number).
Refer to Program 44-05.
F-Route Time Schedule Used =
0-500 (F-Route Selection Number).
Refer to Program 44-04.
Programming
Aspire M/L/XL
Available.
Dial Analysis Tables increased from 200 to
400 with software 2.63+.
1-400
Input Data
(Press line key 1)
0 = No ARS
In Service Type 2:
0-16
0-15
Default
No Setting
0
0
10
0
◆ 191

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aspire lAspire sAspire mAspire xl

Table of Contents