Department Group Basic Data Setup; Description - NEC Aspire Series Networking Manual

Programming

16-01 : Department Group Basic Data Setup

16-01 : Department Group Basic Data Setup
Level:
IN

Description

Input Data
Department Group Number
Item
No.
01 Department Name
02 Department Calling Cycle
Use this option to set the call routing
for Department Calling. Routing can
be either circular (cycles to all phones
in group) or priority (cycles to highest
priority extensions Þrst).
03 Department Routing When Busy
Use this option to set how the system
routes an Intercom call to a busy
Department Group member. Intercom
callers to the extension can either hear
busy or route to the Þrst available
department number. This only occurs
for calls to the extension directly, not
the department number assigned in
Program 11-07.
04 Hunting Mode
Use this option to set the action taken
when a call reaches the last extension
in the Department Group (0=hunting
stopped, 1 =hunting repeats with circu-
lar routing through the Department
Group.
166 ◆
Aspire S
• Available - 8 Department Groups.
• Applicable to IP and ISDN Networking.
Use Program 16-01 : Department Group Basic Data Setup to set the function mode for each
department group.
Item
• Available - 64 Department Groups.
• Applicable to IP and ISDN Networking.
Input Data
Max. 12 characters
0 = Priority Routing
1 = Circular Routing
0 = Normal (Intercom caller to busy
department member hears busy)
1 = Circular (Intercom callers to busy
department member routes to idle
member)
0 = Last extension is called and hunting
is stopped.
1 = Circular
Aspire M/L/XL
Aspire S: 1-8
Aspire: 01-64
Default
No setting
0
0
0
Related
Program
11-07
16-02
16-02
Networking