Figure 5-59 "Basic Lens Data" Assignment Of Speech Channels (Afip) - NEC NEAX 2400 IMX Manual

DATA PROGRAMMING
Assignment of FCH Related Data
STEP 9: AFIP
Assign the FCCS Networking over IP data for controlling Speech Channels between PBX and router.
FCHN (FCH Number): Assign FCHN specified in STEP 4.
FGHEN (FGH Equipment Number): Assign LV0 data of FGH LENs.
LENS (Equipment Number of Qsig-Prime B channel): Assign basic LENS of the Speech Channels.
RT-ACC (Router Access Number): Assign the Router Access Number (max. 16 digits).
Assign "LENS" and "RT_ACC" corresponding to the router port.
Note 1:
Assign the "Basic LENS data" of the Speech Channels (1st LEN of the HW block where the DTI card is
Note 2:
mounted).
The following shows "basic LENS data" for assigning Q-sig-Prime B channel data. Assign the 1st LEN of the
HW block where the DTI card is mounted.
HW:Highway Block

Figure 5-59 "Basic LENS Data" Assignment of Speech Channels (AFIP)

STEP 10: ASYD
Assign the data for nailed-down connection between FCH and FGH cards.
SYS 1, Index 60, b4 = 1 (Nailed-down connection: In service)
STEP 11: AFCD
Assign the detailed nailed-down connection data.
LENS-A: Assign the LENS data of FCH card.
EAD-A: Assign "0".
LENS-B: Assign the LENS data of FGH card.
EAD-B: Assign "0".
Note: Assign all the data for FCH/FGH LENS (LV0-LV7).
CHAPTER 5
Page 110
Revision 3.0
HW0 HW1 HW2 HW3 HW5
HW4
ND-70185 (E)
Get other manuals https://www.bkmanuals.com
HW6 HW7 HW8 HW9 HW11
HW10
indicates "basic LENS data."
Note 2
PIM