Telephone Programming Instructions - NEC Aspire Series Networking Manual

Telephone Programming Instructions

Networking
22-05 : Incoming Trunk Ring Group Assignment
To enter data for Program 22-05 (Incoming Trunk Ring Group Assignment):
1. Enter the programming mode.
2. 22 05
22-05-01 Trunk1
Mode1 =1
↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓
back
3. Enter the number of the item you want to program.
22-05-nn Trunknnn
nnnnn
← ← ← ←
4. Select the trunk number to be programmed by pressing the FLASH or the VOLUME
▼
VOLUME keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you've exited that series's programming section.
select
→ → → →
Programming
▲
or
◆ 175