Feature Cross Reference; Telephone Programming Instructions - NEC Aspire Series Networking Manual

Feature Cross Reference

Telephone Programming Instructions

Networking
● Direct Inward Dialing (DID)
To enter data for Program 22-10 (DID Translation Table Setup):
1. Enter the programming mode.
2. 22 10
22-10-01 Conv Area1
No.1_Start_Add1
↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓
back
3. Enter the number of the item you want to program.
22-10-nn Conv Areann
nnnnn
← ← ← ←
4. Select the Conversion Table Area number to be programmed by pressing the FLASH or the
▲
VOLUME or VOLUME
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you've exited that series's programming section.
22-10 : DID Translation Table Setup
select
→ → → →
▼
keys.
Programming
◆ 179