Setup Procedure Of Fc Switch Module - NEC SIGMABLADE N8406-019 User Manual

4. Setup Procedure of FC Switch Module

The setup procedure of the FC Switch Module is described below.
Explained in this
User's Guide
Installing FC Switch Module
Install FC switch module in Blade Enclosure.
Installing SFP Module
Install SFP modules in FC switch module.
Setting Up FC Switch Module
Provide several settings for the FC Switch Modules.
Connecting Peripherals
Connect peripherals to the external ports on the FC Switch
Modules.
If FC Switch Modules are subjected to cascade connection, perform the
procedure described in "Appendix Cascade Connection" before connecting
peripherals to the FC Switch Modules.
- 45 -
See Page 46.
See Page 51.
See Page 53.
See Page 54.