System Options For Ars/F-Route; Description; Feature Cross Reference; Telephone Programming Instructions - NEC Aspire Series Networking Manual

Programming

44-01 : System Options for ARS/F-Route

44-01 : System Options for ARS/F-Route
Level:
IN

Description

Input Data
Item No.
01 ARS/F-Route Time Schedule
If this option is set to '0', the F-Route table selected is determined only by the
digits dialed without any relation to the day or time of the call.
If this option is set to '1', the system Þrst refers to Program 44-10. If there is
a match, the pattern deÞned in that program is used. If not, the F-Route pat-
tern in Program 44-09 and time setting in 44-08 are used.
Conditions

Feature Cross Reference

Telephone Programming Instructions

196 ◆
Aspire S
• Available.
• Applicable to IP and ISDN Networking.
Use Program 44-01 : System Options for ARS/F-Route to deÞne the system options for the ARS/
F-Route feature.
Item
None
● Automatic Route Selection (ARS)/F-Route
To enter data for Program 44-01 (System Options for ARS/F-Route):
1. Enter the programming mode.
2. 44 01
44-01-01
F-Route_Mode 0:No
↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓
back
3. Enter the number of the item you want to program.
44-01-nn
nnnnn
← ← ← ←
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you've exited that series's programming section.
•
•
select
→ → → →
Aspire M/L/XL
Available.
Applicable to IP and ISDN Networking.
Input Data
0 = Not Used
1 = Used
Default
0
Networking