Feature Cross Reference; Telephone Programming Instructions - NEC Aspire Series Networking Manual

Programming
26-02 : Dial Analysis Table for ARS/LCR
Conditions

Feature Cross Reference

Telephone Programming Instructions

192 ◆
Item No.
06 LCR Carrier Table
Select the Carrier Table to
be used for dial edit. Table 1
is a special table - this table
will be automatically used
for all numbers that begin
with "0" and which do not
correspond with the entry in
Program 26-02-01.
None
● Automatic Route Selection
To enter data for Program 26-02 (Dial Analysis Table for ARS/LCR):
1. Enter the programming mode.
2. 26 02
26-02-01 Analysis Tbl1
Dial
↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓
back
3. Enter the number of the item you want to program.
26-02-nn
nnnnn
← ← ← ←
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you've exited that series's programming section.
Item
select
→ → → →
Input Data
0-25
Default
0
Networking