Single Digit Service Code Setup; Description - NEC Aspire Series Networking Manual

11-16 : Single Digit Service Code Setup

Level:
IN

Description

Input Data
Item
No.
01 Step Call
02 Barge In
03 Switching of Voice/Signal Call
04 Intercom Off Hook Signaling
05 Camp-On
06 DND/Call Forward Override
07 Message Waiting
08 Voice Over
09 Access to Voice Mail
10 STG All Ring Mode
11 Personal Park
Conditions
Networking
11-16 : Single Digit Service Code Setup
Aspire S
• Available.
• Applicable to IP and ISDN Networking.
• Item 11 requires software 2.64+.
Use Program 11-16 : Single Digit Service Code Setup to customize the one-digit Service Codes
used when a busy or ring back signal is heard. You can customize additional Service Codes in Programs
11-10 through 11-15. The following chart shows:
●
The number of each code (01-10)
● The function of the Service Code.
● What type of telephones can use the Service Code
● The code's default entry. For example, dialing 1 (code 03) when calling an extension will
switch the call from either a voice or signal call (depending on how it's currently deÞned).
● Programs that may be affected by changing these codes.
If you change a Service Code, be sure to record your entry in the "New" column.
Item
None
Programming
Aspire M/L/XL
• Available.
• Applicable to IP and ISDN Networking.
• Item 11 requires software 2.64+.
Default New
#
No Setting
1
7
2
No Setting
0
6
8
No Setting
No Setting
Related
Program
16-01-05
◆ 155