Dial Analysis Extension Table; Description - NEC Aspire Series Networking Manual

Programming

44-03 : Dial Analysis Extension Table

44-03 : Dial Analysis Extension Table
Level:
IN

Description

Input Data
Item
No.
01 Dial
02 ARS/F-Route
Select Table
Number
Item
No.
03 ARS/F-Route
Select table
Number
200 ◆
Aspire S
• Available.
• Applicable to IP and ISDN Networking.
When Program 44-02-02 is set to type "3", use Program 44-03 : Dial Analysis Extension Table to
set the dial extension analysis table. These tables are used when the analyzed digits must be more
than 8 digits. If the received digits do not match the digits set in tables 1-250, table number 252 is
used refer to the next Extension Table Area (1-4) to be searched. If the received digits are not iden-
tiÞed in tables 1-250, the F-Route selection table number deÞned in table 251 is used.
Note: The item numbers indicated below are different when using PCPro/WebPro due to the win-
dow layout of the applications. Refer to the program within the PCPro/WebPro application
to determine the correct item number.
Extension Table Area Number
Dial Analysis Table Number
Dial Analysis Table Number : 1-250
Item
With Program 44-01 set to 0, Program 44-05 is then checked.
With Program 44-01 set to 1, Program 44-04 is then checked.
Dial Analysis Table Number : 251
Item
With Program 44-01 set to 0, Program 44-05 is then checked.
With Program 44-01 set to 1, Program 44-04 is then checked.
• Available.
• Applicable to IP and ISDN Networking.
Input Data
Up to 24 digits
Digits = 1-9, 0, *, #, @
(Press Line Key 1 for wild character @)
0-500 (ARS/F-Route Table Number)
Input Data
0-500 (ARS/F-Route Table Number)
Aspire M/L/XL
1-4
1-252
Default
No setting
0
Default
0
Networking