Feature Cross Reference; Telephone Programming Instructions - NEC Aspire Series Networking Manual

Programming
11-10 : Service Code Setup (for System Administrator)
Item
No.
34 Set Caller ID Refuse
DeÞne the service code to be used to enable/disable
the Caller ID call refusal for the trunks which are pro-
grammed in Program 14-01-27 to 1.
35 DID Mode Switching
Assign the service code to be used to manually change
the time pattern for a DID number.
Conditions

Feature Cross Reference

Telephone Programming Instructions

146 ◆
Item
None
Refer to chart above.
To enter data for Program 11-10 (Service Code Setup (for System Administrator)):
1. Enter the programming mode.
2. 11 10
11-10-01
NT-Mode_Switch *01
↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓
back
3. Enter the number of the item you want to program.
11-10-nn
nnnnn
← ← ← ←
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you've exited that series's programming section.
Terminals
KST, SLT
select
→ → → →
Default New
No Setting
No Setting
Related
Program
14-01-27
Networking