NEC Aspire Series Networking Manual page 168

Programming
14-01 : Basic Trunk Data Setup
Item
No.
06 SMDR Print Out
Use this option to have the system
include/exclude the trunk you are pro-
gramming from the SMDR printout. See
Program 35-01 and 35-02 for SMDR
printout options.
07 Outgoing Calls
Use this option to allow/prevent outgoing
calls on the trunk you are programming.
08 Toll Restriction
Use this option to enable/disable Toll
Restriction for the trunk. If enabled, the
trunk follows Toll Restriction program-
ming (ex: Programs 21-05, 21-06). If dis-
abled, the trunk is a toll free line.
09 Private Line
Use this option to enable/disable a trunk's
ability to be used as a Private Line.
10 DTMF Tones for Outgoing Calls
Use this option to enable (1) or disable (0)
DTMF tones for outgoing trunk calls.
11 Account Code Required
Use this option to enable (1) or disable (0)
Forced Account Codes.
12 - Not Used -
13 Loop Disconnect Supervision
Use this option to enable (1) or disable (0)
loop supervision for the trunk. This option
is required for Call Forwarding
Off-Premise and Tandem Trunking
(including 2 B-Channel Transfer with
PRI) only.
14 Long Conversation Cutoff
Use this option to enable or disable the
Long Conversation Cutoff feature for each
trunk.
15 Long Conversation Alarm Before Cut
Off
Use this option to enable or disable the
Long Conversation Alarm for each trunk.
158 ◆
Item Input Data
0 = No print out
1 = Prints out
0 = prevented
1 = allowed
0 = Restriction disable
1 = Restriction enable
0 = Private line disable
1 = Private line enable
0 = disable
1 = enable
0 = disable
1 = enable
0 = disable
1 = enable
0 = disable
1 = enable
0 = disable
1 = enable
Related
Default
Program
0
1
1 21-04
21-05
21-06
0
0
1
1
1
0 20-21-03
20-21-04
0 20-21-01
20-21-02
Networking