How To Exit The Programming Mode - NEC Aspire Series Networking Manual

Table of Contents

Advertisement

How to Exit the Programming Mode

Networking
To exit the programming mode:
When you are done programming, you must be out of a program's options to exit (pressing the
MSG key will exit the program's option).
1.
Press MSG key to exit the program's options, if needed.
Program Mode
Base Service OP1 OP2
2.
Press SPK. You see, "Saving System Data" if changes to were to the system's programming.
3.
The display shows "Complete Data Save" when completed and will exit the phone to an idle
mode.
To save a customer's database, a blank PC-ATA card or CompactFlash with PCMCIA
Adapter is required. Insert the card into the NTCPU and, using Program 90-03, save the
software to the PC-ATA/CompactFlash card. (Program 90-04 is used to reload the cus-
tomer data if necessary.) Note that a PC-ATA/CompactFlash card can only hold one cus-
tomer database. Each database to be saved will require its own separate card.
Programming
Programming Basics
◆ 103

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aspire lAspire sAspire mAspire xl

Table of Contents