Call Forward, Off-Premise - NEC Aspire Series Networking Manual

Call Forward, Off-Premise

Call Forward, Off-Premise
Conditions
Operation
Related Programs
Networking
Off-Premise Call Forwarding allows an extension user to forward their calls to an off-site location.
This feature works the same in a networked system as it does a single system.
A call to an extension at a remote system will forward to the Abbreviated Dial bin using a trunk at
the remote system.
● To ensure proper operation, use system software 2.65 or higher.
To activate Call Forwarding Off-Premise
1. At keyset, press idle CALL key + Dial *4.
OR
Press Call Forward (Device) key (PGM 15-07 or SC 851: 17)
OR
At SLT, lift handset Dial *4.
2. Dial 6 + trunk access code.
Trunk access codes are 9 (ARS/Trunk Group Routing), 804 + Line Group (1-9, 01-99
or 001- 100) or #9 + Line number (e.g., 05 or 005 for line 5.
3. Dial the outside number to which your calls should be forwarded.
4. (Keyset only) Press HOLD.
5. Press SPK (or hang up at SLT) to hang up if you dialed *4 in step 1.
Your DND or Call Forwarding (Device) Programmable Function Key ßashes.
To cancel Call Forwarding Off-Premise
1. At keyset, press idle CALL key + Dial *4.
OR
Press Call Forward (Device) key (PGM 15-07 or SC 851: 17)
OR
At SLT, lift handset and dial *4.
2. Dial 6 + HOLD.
3. Press SPK (or hang up at SLT) to hang up if you dialed *4 in step 1.
Your DND or Call Forwarding (Device) Programmable Function Key stops ßashing.
Program Number
13-01 Abbreviated Dial Function Setup
14-05 Trunk Group
14-06 Trunk Group Routing
21-02 Trunk Group Routing for Extensions
21-16 Trunk Group Routing for Networking
Call Forward, Off-Premise
Title
Features
◆ 51