Ars/F-Route Table; Description - NEC Aspire Series Networking Manual

Programming

44-05 : ARS/F-Route Table

44-05 : ARS/F-Route Table
Level:
IN

Description

Input Data
Item No.
01
02
03
04
05
06
07
204 ◆
Aspire S
• Available.
• Applicable to IP and ISDN Networking.
Use Program 44-05 : ARS/F-Route Table to set the ARS/F-Route table. There are 4 kinds of
order. If the higher priority trunk groups are busy, the next order group will be used. If a lower pri-
ority route is selected, the caller may be notiÞed with a beep tone.
ARS/F-Route Table Number
Priority Number
Item
Trunk Group Number
Select the trunk group number to be used for the
outgoing ARS call.
Delete Digits
Enter the number of digits to be deleted from the
dialed number.
Additional Dial Number Table
Enter the table number (deÞned in Program
44-06) for additional digits to be dialed.
Beep Tone
Select whether or not a beep is heard if a lower
priority trunk group is used to dial out.
Gain Table Number for Internal Calls
Select the gain table number to be used for the
internal call (deÞned in Program 44-07).
Gain Table Number for Tandem Connections
Select the gain table number to be used for the
tandem call (deÞned in Program 44-07).
ARS Class of Service
Select the ARS Class of Service to be used for
the table. An extension's ARS COS is determined
in Program 26-04-01.
Aspire M/L/XL
• Available.
• Applicable to IP and ISDN Networking.
1-500
1-4
Input Data
0-100, 101-150, 255
(0 = No setting, 101-150 =
Networking,
255 = Extension Call)
0-255
(255 = Delete all)
0-1000
0 = off
1 = on
0-500
(0 = No setting)
0-500
(0 = No setting)
0-16
Default
0
0
0
0
0
0
0
Networking