Product Description - Pepperl+Fuchs IC-KP2-2HB21-2V1D Manual

IC-KP2-2HB21-2V1D

Product Description

4 Product Description
4.1 Product family
The brand name, IDENTControl, represents a complete identification system. The
system consists of an IDENTControl Compact unit with bus interface, inductive
R/W heads (125 kHz and 13.56 MHz), R/W heads with electromagnetic coupling
(UHF with 868 MHz) and accompanying code, and read/write tag in many
different designs. The IDENTControl Compact can be connected to other
identification systems.
The system is equally well suited for use in the switching cabinet and for field use
in IP67. The interface to the controlling fieldbus is integrated into the enclosure
and all connections are implemented as plugs. This enables simple installation
and quick, correct replacement in case of device failure. The consistent EMC
design (metal enclosure, grounding, shielded wires) offers a high degree of noise
immunity.
4.1.1 R/W heads
There are different R/W heads available for the IDENTControl Compact in
different designs. You can connect inductive R/W heads (125 kHz and
13.56 MHz) or R/W heads with electromagnetic coupling (UHF with 868 MHz)
depending on your particular application.
4.1.2 Read Only Tags/Read/Write Tags
Read only / read/write tag 125 kHz (inductive)
A wide range of read only and read/write tag designs are available for this
frequency range, from a 3 mm thin glass tube to a transponder 50 mm in diameter.
Read/write tags are available for temperatures up to 300 °C (max. 5 min) in
chemical-resistant housings for installation in metal and in degree of protection
IP68/IP69K. IPC02-... read only tags offer 40-bit read only codes. IPC03-...
read/write tags have a 928-bit freely programmable memory bank and an
unmodifiable 32-bit read only code. You can define 40-bit read only codes with
IPC11-... read only tags. You can use these as permanent read only codes or
continually redefine them.
Read/write tag 13.56 MHz (inductive)
Read/write tags in this frequency range save larger quantities of data and offer a
considerably higher reading speed than read/write tags of the 125 kHz system.
IQH-* and IQH1-* read/write heads from Pepperl+Fuchs are compatible with most
existing read/write tags that comply with standard ISO 15693. With the IQH2-*
read/write heads you can use read/write tags that comply with standard ISO
14443A.
The 13.56 MHz technology even allows smart labels (read/write tags in the form
of adhesive labels with printed barcode). Currently available read/write tags have
a memory capacity of 64 bits of read only code and a maximum 2 KB of
programmable memory.
9