Help - SMART Embedded Computing MVME7100ET Installation And Use Manual

 The argument/option identifier character is always preceded by a hyphen (-)
character.
 Options are identified by a single character.
 Option arguments immediately follow (no spaces) the option.
 All commands, command options, and device tree strings are case sensitive.
Example:
MVME7100> flashProgram –d/dev/flash0 –n00100000
For more information on MOTLoad operation and function, refer to the MOTLoad Firmware
Package User's Manual.
6.4.2

Help

Each MOTLoad firmware package has an extensive, product-specific help facility that can
be accessed through the help command. The user can enter help at the MOTLoad
command line to display a complete listing of all available tests and utilities.
Example:
MVME7100> help
For help with a specific test or utility the user can enter the following at the MOTLoad
prompt:
help <command_name>
The help command also supports a limited form of pattern matching. Refer to the help
command page.
Example:
MVME7100> help testRam
Usage: testRam [-aPh] [-bPh] [-iPd] [-nPh] [-tPd] [-v]
Description: RAM Test [Directory]
Argument/Option Description
-a Ph: Address to Start (Default = Dynamic Allocation)
-b Ph: Block Size (Default = 16KB)
-i Pd: Iterations (Default = 1)
-n Ph: Number of Bytes (Default = 1MB)
-t Ph: Time Delay Between Blocks in OS Ticks (Default = 1)
-v O : Verbose Output
MVME7100>
MVME7100ET Single Board Computer Installation and Use (6806800K87G)
MOTLoad Firmware
93