Environmental Requirements; Table 2-2 Mvme7100Et Specifications - SMART Embedded Computing MVME7100ET Installation And Use Manual

2.3.1

Environmental Requirements

The following table lists the currently available specifications for the environmental
characteristics of the MVME7100ET. A complete functional description of the
MVME7100ET baseboard appears in
Operating temperatures refer to the temperature of the air circulating around the
board and not to the component temperature.
Table 2-2
Characteristics
Cooling Method
Operating temperature
Storage Temperature
Temperature Transition Time
Vibration
Humidity
The RTC field removable battery should be removed, if MVME7100ET has to be
stored beyond its operational temperature range.
Product Damage
High humidity and condensation on the board surface causes short circuits.
Do not operate the board outside the specified environmental limits.
Make sure the board is completely dry and there is no moisture on any surface
before applying power.
MVME7100ET Single Board Computer Installation and Use (6806800K87G)
MVME7100ET Specifications
Operating
Forced air
-40°C to 71°C (-40°F to 160°F)
-50°C to +100°C
Operational temperature transition rate 0.5°C/minute
Swept sine: 1.0g from 5.0 to 200Hz
Sweep rate: 0.25 octaves/minute
Designed to operate up to 100% relative humidity, Non
condensing
Hardware Preparation and Installation
Chapter 4, Functional Description on page
NOTICE
69.
31