Table of Contents
Advertisement
Installation
Decorative Glass Murano 2200DGM
Material required
• Decorative Glass Murano kit, which contains:
• 1 bag of clear fi reglass
• 2-piece glass platform
• 8 ceramic pads
Installation
Carefully unpack the kit.
1. Install the 8 ceramic pads around the burner as indicat-
ed. The pads will raise the glass platform.
2. Install the front and rear glass platform, smooth side up, on the ceramic pads.
3. Carefully spread the fi reglass by hand on the surface of burner forming a single layer to the level of the top edge
of the fl ange around the burner.
the burner ports.
NOTE:
Ensure the areas
Decorative Glass Murano installed
42
Do not pour directly from the bag and do not pour too much to avoid blocking
within
the pilot shield and pilot safe zone are clear of fi reglass.
WARNING
CHOKING HAZARD! Ensure that the
fireplace area is clear of fireglass particles
as these could be ingested by small
children. Vacuum area after installation.
IMPORTANT: Approved for use only with the fi reglass
provided with your Valor fi replace The use of any
other fi reglass products may void your fi replace war-
ranty.
Pilot shield
Fuel Beds
Pilot safe zone
Advertisement
Table of Contents
