Table of Contents
Advertisement
Installation
Decorative Glass Murano 1700DGM
Material required
• Steel platform (supplied with appliance)
• Decorative Glass Murano Glass kit, which contains:
• 1 bag of clear 1/2" fi reglass
• 8-pieces glass platform
Installation
Carefully unpack the kit.
1. Install the steel platform around the burner as
indicated. The openings in the platform should be
underneath.
Installed platform
2. Install the glass plates on the platform, textured side
underneath and smooth side on top. Follow the dia-
gram below as the pieces are not all the same size.
pilot area
narrower glass plates at the back
longer glass plates
narrower
in the middle
wider glass plates at the front
Top view—glass plates
Installed glass plates
3. Carefully spread the fi reglass by hand, on the sur-
face of burner forming a single layer to the approxi-
mate level of the top edge of the fl ange around the
burner. Do not pour from the bag and do not pour
too much to avoid blocking the burner ports.
4. Some fi reglass may be added on the platform to
cover the edge of the burner and in the space in
front and behind the pilot shield.
NOTE: Ensure the area within the pilot shield is clear
of fi reglass.
wider
IMPORTANT: Approved for use only with the fi reglass
provided with your Valor fi replace or the tempered
crushed fi reglass brands American Fireglass™ or
fi regear. The use of any other fi reglass products may
void your fi replace warranty.
Choking Hazard! Ensure that the fireplace
area is clear of fireglass particles as these
could be ingested by small children.
Vacuum area after installation.
Pilot shield
WARNING
Fuel Beds
43
Advertisement
Table of Contents
