Installation
Birch Logs 1400BLK
Material required
• Birch logs kit, which contains:
• 8 logs
• 4-piece ceramic plaque
• 1 ember bed
• Gloves, if desired (not supplied)
H74
H75
H56
H54
H53
Installation
Carefully unpack the kit. Identify each log according to
the above image.
Ceramic Plaque
1. Place the front right ceramic piece of the plaque on
the burner cover.
H76
H77
H57
H55
2. Place the front left ceramic piece.
3. Place the rear left ceramic piece.
4. Place the rear right ceramic piece.
Ceramic plaque installed
Logs
Please note that the position of the logs is critical to
ensure the proper performance of the appliance.
1. Place ember bed H53 onto the burner. Carefully
locate it centered left to right and front to back.
H53
Fuel Beds
51