Fuel Beds; Traditional Logs 534Lsk - Valor HORIZON 534JN Installation Manual

Installation

Traditional Logs 534LSK

Unpack the ceramic logs very carefully to avoid
damaging their fragile material. Install the logs as
shown below. Please note that the position of the
logs is critical to insure the good performance of
the appliance.
1. Place the rear log on the sheet metal support cen-
tering it side to side in the fi rebox. Pull it forward un-
til the notch in the underside of the log sits against
the front edge of the sheet metal support.
2. Place the top left log on the pin of the rear log. The
bottom of the log rests against the left of the pilot
shield and slightly above.
Pilot
3. Place the front left log on the burner. Slide it to the
left against the top left log. The narrow end should
rest in the notch in the rear log.
Pilot
4. Place the front right log on the burner and slide it to
the left against the front left log.
5. Locate the top right log on the two pins on the right
side of the rear log. Ensure a tight fi t against the fl at
area around the pins in the rear log.

Fuel Beds

29