Alarms Screen - Huawei UPS5000-A-300K-STT User Manual

UPS5000-A-(200 kVA-800 kVA)
User Manual
Table 4-8 Total runtime
Item
Bypass runtime (h)
Inv. runtime (h)
Table 4-9 Environment data
Item
Ambient temperature (° C)
Ambient humid. (%)



4.1.2.2 Alarms Screen

Tap
Figure 4-5 Alarms Screen
Issue 03 (2019-02-15)
The value must be an integer. For example:
 If the value is less than 1, the value takes 0.
 If the value is greater than or equal to 1 and less than 2, the value takes 1.
Battery Detailed Data - Batt. String Data: reflects the voltage, current, SOC, and SOH
data of each battery string.
Battery Detailed Data - String N Battery Data: reflects the temperature, voltage, internal
resistance, current, SOC, and SOH data of a single battery in the battery string.
on the System Info screen to enter the Alarms screen.
Copyright © Huawei Technologies Co., Ltd.
Description
Time for which the UPS runs in bypass mode.
Time for which the UPS runs in inverter mode.
Description
Temperature measured by the ambient temperature and
humidity sensor. (An ambient temperature and humidity
sensor is required. If no sensor is connected, the ambient
temperature sampled by the bypass module is displayed.)
Humidity measured by the ambient temperature and
humidity sensor. If the sensor is not installed, NA is
displayed.
4 User Interface
225