Huawei UPS5000-A-300K-STT User Manual page 96

UPS5000-A-(200 kVA-800 kVA)
User Manual
Combining Power Cabinets and Bypass Cabinets
The power cabinets and bypass cabinets are separately packed for delivery. Before installing
the UPS, combine the power cabinets and bypass cabinets. Before combining the cabinets,
ensure that the required fittings are complete. Table 3-15 lists the fittings.
Table 3-15 Fitting list
Mounting Number of
Fitting Fittings
(PCS)
Bottom 2
connecting
kit
Top
2
connecting
kit
Soft 2
connecting
copper bar
Grommet N/A
strip
Middle 2
connecting
kit
Step 1 Use a pallet truck to move the power cabinets and bypass cabinets to the mounting holes for
the cabinets with the power cabinets on the left and the bypass cabinets on the right. Align the
cabinets to ensure that their front doors are aligned.
Step 2 Open the front doors of the power cabinets and bypass cabinets.
Step 3 Install the connecting kits between the bypass cabinet and its adjacent power cabinet based on
the following sequence: bottom, top, and middle connecting kits.
Issue 03 (2019-02-15)
Screw Number of
Specifications Bolts (PCS)
M12x25 8
M6x30 8
M12x45 10
N/A N/A
M6x30 4
Copyright © Huawei Technologies Co., Ltd.
Torque Remarks
(N•m)
47  Fittings are delivered
with the UPS. You can
see the fittings after
unpacking the bypass
3
cabinet.
 The two soft copper bars
are numbered 52.
47

If holes are drilled for
routing cables at the top
of the cabinet, attach
grommet strips on the
N/A
hole edges to protect
cables.
3 Installed on the cabinet
before delivery.
3 Installation
87