Alarms Screen - Huawei UPS5000-E Series User Manual

UPS5000-E-(20 kVA-160 kVA)
User Manual (Low voltage)
Table 4-7 Battery status
Item
Battery Status
Voltage (V)
Current (A)
Temperature (° C)
Backup time (min)
Remaining cap. (%)
SOH
Table 4-8 Total runtime
Item
Bypass runtime (h)
Inv. runtime (h)
Table 4-9 Environment data
Item
Ambient temperature (° C)
Ambient humid. (%RH)

4.1.2.3 Alarms Screen

Tap
Issue 03 (2020-04-27)
The value must be an integer. For example:
 If the value is less than 1, the value takes 0.
 If the value is greater than or equal to 1 and less than 2, the value takes 1.
on the System Info screen to enter the Alarms screen.
Copyright © Huawei Technologies Co., Ltd.
Description
The value can be Not connected, Equalized charging,
Float charging, Hibernating, discharging, or Not chg.
or dis.
Voltage of the battery string.
Current of the battery string (the current is + when
batteries are being charged and – when discharged).
Battery operating temperature (A battery sensor is
required. If the sensor is not installed, N/A is displayed).
Battery backup time estimated at the current load.
Remaining battery capacity.
State of health.
Description
Time for which the UPS runs in bypass mode.
Time for which the UPS runs in inverter mode.
Description
Temperature measured by the ambient temperature and
humidity sensor. (An ambient temperature and humidity
sensor is required. If no sensor is connected, the ambient
temperature sampled by the bypass module is displayed.)
Humidity measured by the ambient temperature and
humidity sensor. If the sensor is not installed, N/A is
displayed.
4 User Interface
96