Table of Contents
Advertisement
UPS5000-A-(200 kVA-800 kVA)
User Manual
Issue 03 (2019-02-15)
Remove small covers for routing cables.
Remove the cable cover for signal cables, and remove small covers from the bottom
based on site requirements, as shown in Figure 3-68.
Figure 3-68 Removing small covers from the bottom of the cabinet
Drill holes into the large cover for routing cables.
a.
Remove all the cable cover for signal cables and small covers from the bottom.
b.
Remove the two large covers from the bottom rear of the cabinet, drill holes into
them, and install them to the positions where the small covers were originally.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
116
Advertisement
Table of Contents
