Table of Contents
Advertisement
UPS5000-A-(200 kVA-800 kVA)
User Manual
Step 4 View the system running diagram on the MDU to check that the UPS is working in bypass
mode.
----End
The Service Expert
User interfaces displayed in this document correspond to the app version V100R001C00B055
and are for reference only.
If the initial startup verification passes, startup verification is not required afterwards.
After factory settings are restored, re-verification for startup is required.
Online Startup
Step 1 Insert a WiFi module into the USB port on the MDU.
Step 2 Enable the mobile phone WLAN, search for the UPS WiFi signal, and connect to the WiFi
signal. The default value of SSID is UPS_WIFI.
Step 3 Open the Service Expert app on the mobile phone.
Step 4 On the home screen of the app, tap Startup to access the Set Startup screen.
Issue 03 (2019-02-15)
For offline startup, enter the barcode and the verification code on the mobile phone app.
The app automatically generates a startup password for the UPS. Then enter the password
on the MDU screen to start the UPS.
For online startup, activate the startup password on the mobile phone app to start the UPS.
The initial WiFi password is Changeme by default. You can change the password by choosing System
Info > Settings > Comm Settings > WiFi Settings on the MDU.
Copyright © Huawei Technologies Co., Ltd.
app can be downloaded from Google Play and can run on Android.
5 Operations
285
Advertisement
Table of Contents
