A 2 Machine Description - Promag CUOCICREMA Series User Instructions

PROMAG
Significance of trade-mark names
STARCREM 30 = 30 litres
STARCREM 60 = 60 litres
Function:
MULTI F UNCTI O NAL MACHI N E TO BE USED EXCLUSI V ELY FOR PASTRY
PRODUCTS (CREAM COOKING) AND ICE CREAM MAKING
(PREPARATION AND/OR PASTEURIZATION OF ICE CREAM MIXES,
MAI N TENANCE AND/ O R MATURI N G OF I C E CREAM MI X ES).
For technical data of machines, see enclosures.
Machine components
The machine is complete with a main frame with a stainless
steel structure, the base of which is provided with four
wheels, one at each corner.
The frame is parallelpipedal, containing the cylinder,
electric box and cooling system.
The cylinder is mounted vertically, disposing of a cooling
system on external surface (containing refrigerating gas),
a heating system (containing water) and a deep basin
(containing water), in which resistances are located, and
whereby heating is carried out with "bain-marie" method,
a particular characteristic of Promag.
The low speed and high speed mixer shafts are
immersed in the cylinder. They are connected to
respective motors, the latter being assembled onto motor
bearings.
The main cooling system elements comprise: a
compressor, a condenser, a thermostatic valve and a
compressor pressure switch.
The cylinder diposes of an outlet which is located on the
front side of the machine. This opening may be closed
with a cock, provided with a piston with two O-ring seals.
Above closes outlet at the level of container edge. This
solution guarantees a perfect hygiene, as the mix
contained in the cylinder has no chance of stagnating in
the stub pipe.
The outlet diameter may also be reduced for the
discharge of extremely liquid mixes.
Two half-lids are located at the upper part of the cylinder,
served by two magnetic safety microswitches.
STARCREM 30/1 INV
A 2 - MACHINE DESCRIPTION
On opening any one of the two lids, all machine
operations will be interrupted and "OPEN" will appear
on the display.
As already mentioned, the motors are mounted on
motor bearings.
Above are served by a magnetic safety microswitch.
On lifting the motor bearings, all operations of the
machine are interrupted and "OPEN" will appear on
the display.
The manual cock commanding the small washing
shower unit is located on the upper left front side of
the machine.
The small shower unit is situated on the bottom of the
cylinder in the right-hand corner.
A control panel, facing inwards, is located on the upper
front side of the machine, where an electronic card
may be found.
Control buttons are accessible on control panel.
The electric box, as described above, is also included
inside the frame and is positioned on the rear side of
same.
Water connections for cooling system are present on
the rear side of the machine, in addition to those for
drinking water for small shower unit.
Electric feed cables are also present.
USER INSTRUCTIONS
- STARCREM 60/1 INV
9
GB