A 31 Cycle I Cooling - Promag CUOCICREMA Series User Instructions

PROMAG
STARCREM 30/1 INV - STARCREM 60/1 INV
A 31 - CYCLE I Cooling
A 31.1
2
Visualize cycle I on display (see program check).
Press button (2).
Pre-cooling electrovalve starts up if temperature
measured is over 14 I.
Refrigeration compressor starts up if temperature
measured is less than 5 I.
Manual high speed mixer motor starts up.
Manual continuous low speed mixer motor starts up.
Manual alternated low speed mixer motor starts up.
If times 8 I and 9 I have been set and if temperature
is less than 7 I.
A 31.2
GB
If cooling cycle has taken place with high speed
mixer motor with 11 I: OFF, at the temperature of 3 I
the compressor will be turned off.
If the cooling cycle has taken place with the alternated
low speed mixer, at the temperature of 3 I,
compressor will turn off, together with low speed
mixer.
When temperature increases by 2°C with respect to
3 I, refrigeration compressor will start up again,
together with alternated mixing up to 3 I.
USER INSTRUCTIONS
43