A 27 Cycle C Low Temperature Pasteurization For Ice Cream Mix - Promag CUOCICREMA Series User Instructions

PROMAG
STARCREM 30/1 INV - STARCREM 60/1 INV
A 27 - CYCLE C low temperature pasteurization of ice cream mix
A 27.1
13
Visualize cycle C on display (see program check).
17
15
Press button (1) (cooking cycle start-up button).
Led 13 will light up.
Electrovalve will load water for 1 minute.
1
During loading time, the low speed "motor" (led 15 lit)
and high speed "motor" (led 17 lit) will start up at a distance
of 15 seconds from one another.
A 27.2
Once water has been loaded (electrovalve in
OFF position), relay is activated, together with resistance
18
1.
GB
After 5 seconds, relay and resistance 2.
Ringing device 12C is activated (led 18 alight).
Above may be cancelled with button (8).
(led 18 turned off).
The first two digits show temperature variation on display,
the third digit shows the program selected.
8
A 27.3
During heating it is possible to have a 5-second acoustic
signal for introduction of ingredients.
13
During acoustic signal led 18 flashes.
This acoustic signal can be cancelled with button (8) (led
18
18 off).
During the heating phase it is possible to turn off low
4
speed "motor" manually with button (4).
On reaching programmed final cooking temperature 2C,
electric resistances are disconnected, led 13 flashes for
the pause time at the final cooking temperature 10C.
8
USER INSTRUCTIONS
38