Promag CUOCICREMA Series User Instructions page 39

PROMAG
STARCREM 30/1 INV - STARCREM 60/1 INV
13
A 27.4
14
The last two digits of display start COUNT-DOWN of
pause time in minutes.
Once pause time has terminated, the pre-cooling
phase begins.
The electrovalve functions until final pre-cooling tem-
perature 4B is reached (led 13 is off and led 14 is
alight).
At temperature 5C, refrigeration compressor turns
on, turning off at temperature 3C.
SET shows temperature 3C (through button 12).
A 27.5
GB
During cooling phase, motors may be manually
turned off and on. If in operation, refrigeration
compressor, together with low speed "motor" will
turn off at programmed temperature 3C.
The high speed "motor" continues to turn if 11C is
ON.
It stops if on OFF position.
2
A 27.6
When product temperature increases by 2°C with
respect to SET 3C, the compressor starts up.
In same manner, high speed "motor" also starts up
until reaching 3C again.
3
Should "OFF" button ( 1 0) be mistakenly pressed
during cooling phase, press "ON" button (2) to con-
tinue cooling.
A 27.7
In order to extract product, open tap in liquid mix
10
position.
USER INSTRUCTIONS
39