Promag CUOCICREMA Series User Instructions page 4

STARCREM 30/1 INV
INTRODUCTION
This manual gives all assembly, operating and
maintenance instructions required for assuring
excellent operating results and a long machine
service life.
Before starting to use the machine,
read these instructions and follow them
very carefully.
Please do not hesitate to contact us for
any assistance you may require.
Failure to abide by the norms included in this
manual will invalidate the guarantee.
GB
If the machine is sold or otherwise put into another
person's possession,ensure that the manual
accompanies the machine therefore allowing the
new owner to correctly follow the operating
procedures and abide by the relative precautions.
The present "CUOCICREMA" machine,
is a multi-functional machine, destined exclusively
for pastry products (cream cooking) and ice cream
making (preparation and/or pasteurization of ice
cream mixture).
Do not utilize the "CUOCICREMA" for any other use
other than that described above.
A similar use shall be considered improper.
This machine is designed to be used by adults.
Keep children away from the machine;
they should not be allowed to play with it.
Any attempt to modify this machine will not only
invalidate the guarantee but is also extremely
dangerous.
In order to assure efficient, correct machine
operation carefully follow the manufacturer's
instructions and only allow professionally qualified
personnel to perform any necessary maintenance.
4
- STARCREM 60/1 INV
USER INSTRUCTIONS
Never try to repair the machine yourselves,
as any attempt to make repairs by incompetent
persons will not only be dangerous but may also
cause serious injuries.
In the case of a malfunction, contact the distributor
from whom the machine was bought.
They can give you the address of the Authorized
Service Centre closest to you.
Only use original spare parts for any necessary
replacements.
If you decide to no longer use the machine,
we advise you to cut the electrical cord so that it
cannot be used (after disconnecting the plug from
the power socket).
In addition:
- Under no circumstances should the refrigerant
gas or compressor oil be allowed to escape and
thus contaminate the environment.
- See that the machine is disassembled and that
the parts are disposed of in accordance with the
national regulations in force.
This machine contains H.C.F.C. gas which could be
harmful to the environment in the case of incorrect
maintenance operations or disassembly.
Therefore, any such operations must be done in
accordance with the national regulations in force,
and must only be performed by authorized
maintenance personnel.
PROMAG reserves the right to make any and all
modifications reemed necessary in order to keep
the machine updated - technically or otherwise -
as well as to allow it to meet the requirements of
certain individual countries.
For any additional information or technical help you
may require, please contact your authorized service
centre.
PROMAG