A 6 Precautions - Promag CUOCICREMA Series User Instructions

PROMAG
STARCREM 30/1 INV - STARCREM 60/1 INV
A 6 - PRECAUTIONS
Danger points
The machine has certain danger points and areas where
accidents may occur if the following precautions are not
observed.
- It is forbidden and very dangerous to approach machine
cylinder when same is turned on or in motion.
- It is forbidden and very dangerous to carry out
any repairs on system, whether mechanical or electrical,
when the machine is functioning.
Refer to enclosures for electric and water systems.
- It is forbidden to use the machine without operatorís
GB
supervision.
- It is forbidden and very dangerous to come too near
and/or touch with any part of the body and/or any type of
object the shaft bars: low speed and high speed mixers
project from cylinder covers
until reaching motor bearings.
For the same reason do not approach relative motors
from rear side of motor casing.
- It is forbidden and very dangerous to introduce parts of
the body or any type of object into the product outlet.
- It is dangerous to touch machine ON/OFF wall switch
with wet hands.
- It is strictly forbidden to open electric box.
- It is forbidden and very dangerous to approach
the machine with magnetic materials, as they
would interfere with magnetic safety microswitches
located under the two cylinder half-lids and under the
right shoulders of the motor bearings
(For the user only)
It is forbidden and very dangerous for user to carry out any intervention which should
be done by a TECHNICIAN/INSTALLER.
Removal of protective coverings and access to internal parts of machine, in addition to all internal
maintenance operations, repairs, installation, transport and unpacking must be
carried out by qualified personnel.
USER INSTRUCTIONS
11