A 21 Operation - Promag CUOCICREMA Series User Instructions

STARCREM 30/1 INV
A 21 - OPERATION
A 21.1
STARCREM machines have been designed to satisfy customerís needs to the utmost, together with those of
technician-installer/repairer.
With above philosophy, the mix is processed and electronically controlled.
GB
30
- STARCREM 60/1 INV
33
27
2 0 A 9 5
1 1
USER INSTRUCTIONS
forbidden to use steel shavings, wool or brushes.
For protection of environment and machine itself,
please abstain from using corrosive or polluting
products, not exceeding advised quantities.
A 21.2
MACHINE START-UP
Open the water mains tap (33), insert the wall switch (27)
as mentioned above.
OFF will appear on display.
Open the front half-lid and introduce the mix.
The quantities are specified in the following table.
Model
STARCREM 30
STARCREM 60
Close half-lid.
On pushing button (11), display will indicate
temperature measured by product probe and the program
previously set.
It should be pointed out that on pressing this button,
machine is prepared for subsequent
setting phases.
The appearance of temperature on display, is to be
intended as equivalent to ON position (machine in
operation).
At this point, all buttons of control panel are active, whilst
with OFF position, on pressing same,
no response would be given as machine is not operati-
ve.
PROMAG
Minimum Maximum
15 Litri 30 Litri
30 Litri
60 Litri