A 32 Cycle L Manual Cooking - Promag CUOCICREMA Series User Instructions

PROMAG
STARCREM 30/1 INV - STARCREM 60/1 INV
A 32 - Cycle L Manual Cooking
A 32.1
Visualize cycle L on display (see program check).
Press button (1) (cooking cycle start-up button).
18
Led 13 will light up.
Electrovalve will load water for 1 minute.
13
On terminating water loading (electrovalve on OFF
position) relay and resistance 1 are activated.
1
After five seconds relay and resistance 2.
12L temperature alarm during cooking.
Start-up of manual high speed motor.
Start-up of manual low speed motor.
Led 18 is alight.
GB
A 32.2
Motors may also be turned off manually by pressing
button (7) (high speed motor ON/OFF button).
Led 17 is off.
During cooking, an acoustic signal 11L and 12L may be
obtained for five seconds for introduction of ingredients.
Activation of this acoustic signal is visualized by led 18.
Led flashes during acoustic signals.
Signals may be cancelled by pressing button (8).
Led 18 is off.
18
On reaching final cooking temperature 2L, pause time
begins at final cooking temperature 10 L.
17
Electric resistances are no longer active.
Pause phase is indicated by flashing led 13.
In the fourth and fifth digit position (figure or letter) the
display carries out a COUNT-DOWN (backwards) in
minutes until end of pause.
Should the 10L value be zero, the 2L temperature is
controlled with 1t=2°C.
7
8
USER INSTRUCTIONS
44