Promag CUOCICREMA Series User Instructions page 21

PROMAG
STARCREM 30/1 INV - STARCREM 60/1 INV
A 10.4
Extraction of liquid mix
A - Once the cock is closed, pull the lock upwards to discharge
liquid mixes.
B - Place the cock safety lock in vertical position.
C - Pull piston group in perpendicular direction with respect to
outlet, until lock for liquid mix outlet rests against the setscrew.
At this point, the mix will be discharged from the lower part of the
outlet, through the stub pipe with a diameter suitable for liquid
mixes.
Attention:
After every extraction of liquid mixes, wash the cock
perfectly, using the proper swabs. Subsequently, sterilize
Cock
using the proper hygienic solutions.
A 10.4
GB
Extraction of dense mix
A - When liquid mix is ready to be discharged, lower outlet
lock.
B - Pull piston group in perpendicular direction with respect
to outlet, until same rests against the setscrew.
C - Very slightly turn piston group around guide rod.
D - Push piston group, leaning it on outlet.
At this point, a small quantity of the mix will be discharged
from the lower part of the outlet through the pipe stub with a
diameter suitable for liquid mixes, whilst the majority will be
discharged from the front part of the outlet for dense mixes.
Attention:
After every extraction of dense mixes, wash the cock
perfectly, using the proper swabs. Subsequently,
sterilize using the proper hygienic solutions.
Cock
A 10.5
ATTENTION
Never unscrew cock screws. The only screw which
may be unscrewed, for cleaning purposes, is that
supporting the piston guide rod.
USER INSTRUCTIONS
21