PROMAG
STARCREM 30/1 INV
- STARCREM 60/1 INV
A 46 - STOP MODES
A 46.1
Stop device
Operator has stop button (10) at disposal on control
O F F
panel to interrupt machine operation.
On pressing button (10) the word OFF will appear on
display and button functions will be deactivated.
10
A 47 - BLACK OUT
GB
A 47.1
In case the electric energy should be interrupted, all
the functions of the machine are stopped.
When the tension is back, the first and the tenth led
blink. By pressing the button Reset, the blinking led will
turn off and the cycle will be visualised from the point
where it was interrupted.
The user will be able to choose either to start a new
cycle or to continue from where it was interrupted.
Anyway, we advise to start a new cycle with the
following conditions:
- The cycle had been interrupted during the cooling
phase and the time of black out is unknown.
An excessive time at a temperature higher than 4° C
allows the offspring of bacteria.
USER INSTRUCTIONS
53