A 33 Cycle M - N Personalized - Promag CUOCICREMA Series User Instructions

PROMAG
STARCREM 30/1 INV - STARCREM 60/1 INV
A 33 - CYCLE M-N Personalized
A 33.1
17
15
Only parameters which user will insert during programming will vary, according
18
13 to recipes.
1
A 33.2
Visualize cycle M-N on display (see program check).
Press button (1) (cooking cycle button).
Led (13) will come on.
Electrovalve will load water for 1 minute.
During loading time, the low speed "motor" (led 15 lit) and high speed "motor"
(led 17 lit) will start up at a distance of five seconds from one another.
On terminating water loading (electrovalve on OFF position) relay of first
7 resistance is activated.
After five seconds relay of second resistance.
Activation of signalling 12 M-N (temperature alarm during cooking stage).
GB
At programmed temperature 6M-N (temperature at end of high speed mixing)
the high speed "motor" turns off.
The motor may also be turned off manually, by pressing button (7) (high speed
motor ON/OFF button). Led 17 is off.
A 33.3
During cooking cycle, it is possible to have a 5-second acoustic signal 12M-N
for introduction of ingredients.
14
Presence of this acoustic signal is visualized by led 18.
15
13
18
16 Same can be cancelled by pressing button (8). Led 18 is off.
On reaching final cooking temperature 2M-N, pause time begins at final cooking
temperature 10 M-N.
Electric resistances are no longer activated.
The display in fourth and fifth digit position (figure or letter) carries out COUNT-
DOWN (backwards) in minutes until end of pause time. Once time has expired
(00), the display SET visualizes temperature 3M-N of cycle end [(through button
(12)].
The electrovalve opens for pre-cooling until final pre-cooling temperature 4M-
N. The led (14) lights up and led (13) turns off.
Refrigeration compressor starts up at temperature 5A and at temperature 7M-N
8
the low speed mixer passes from continuous operation to intermittent operation
(led 15 off, led 16 alight).
A 33.4
ON/OFF interval times of low speed mixer are 8M-N (OFF time low speed
motor during intermittent stage) and 9M-N (ON time low speed motor during
intermittent stage).
A 33.5
LED LIGHT UP
Leds display process stage of machine.
Each led is associated with a button function, as specified by identical
symbology.
Lit led signifies operation in progress.
Unlit led signifies no operation.
USER INSTRUCTIONS
45