A 11 Scraping Blades - Promag CUOCICREMA Series User Instructions

PROMAG
STARCREM 30/1 INV - STARCREM 60/1 INV
A 11 - SCRAPING BLADES
A 11.1
The slow speed beater shaft is provided with two blades made of teflon,
which function is to scrape the tank wall and at the same time to stir the
product.
A 11.2
Blade assembly
In order to assemble the blades, the motor bearing must
be in vertical position.
GB
Scraping blade for cylinder wall
With regard to above, reference should be made to
paragraphs on safety devices, dangerous points on the
machine and other risks, inviting the user, technician-
installer or any other person to strictly follow instructions
contained therein.
No responsibility will be assumed for improper use of
the machine or operations carried out which are not in
compliance with safety regulations.
The blades are hooked on, mating hole with head,
pushing blade until resting against slot.
A 11.2
Disassembly of blades
Proceed as indicated for assembly, but with reverse
sequence.
Scraping blade for cylinder bottom
USER INSTRUCTIONS
22