Installation/Use Of Machine; A 20 Machine Preparation - Promag CUOCICREMA Series User Instructions

PROMAG
The cream cooking machine must be
positioned so that rear part is at least 20 cm
from wall or any object, thereby permitting free
air circulation.
Block the wheels with fitted brakes. It is
advisable to leave a space between the sides
of the machine and surrounding walls, thereby
facilitating cleaning operations.
A 19.1 OPERATION START-UP
A 19.2
Open the tap of water mains.
A 19.3
Connect to power with
relative switch especially
provided for during
installation.
A 19.4
It is advisable that first work cycle after machine installation is carried out with cylinder full of water rather than mix,
in order to control the various work phases.
To carry out above, proceed as follows:
- Check that OFF is written on display
- Lift the lid and pour water into the cylinder for a quantity not lower than advised minimal values reported in
technical specifications.
- Press button (11) and the temperature of the water in the cylinder will appear on display, together with previously
set program and cycle achievement set.
- Press button (1) and (2) and the cycle will begin.
- Complete the cycle, empty the cylinder through the extraction cock.
STARCREM 30/1 INV
OFF will appear on display.
1
A 20 - MACHINE PREPARATION
USER INSTRUCTIONS
- STARCREM 60/1 INV
A 18 - INSTALLATION
20 cm
A 19 - USE OF MACHINE
2
O F F
GB
11
29