Promag CUOCICREMA Series User Instructions page 37

PROMAG
STARCREM 30/1 INV - STARCREM 60/1 INV
A 26.5
The last two digits of display start COUNT-DOWN of
pause time in minutes.
Once pause time has terminated, the pre-cooling
14
13
phase begins.
The electrovalve functions until final pre-cooling tem-
perature 4B is reached (led 13 is off and led 14 is
2
alight).
At temperature 5B refrigeration compressor will
come on, turning off at temperature 3B. SET indicates
temperature 3B (through button 12).
3
A 26.6
During cooling phase, motors may be turned on and
GB
off manually. At programmed temperature 3B,
refrigeration compressor turns off, together with low
8
speed motor (if functioning).
High speed motor continues to turn if 11 B is ON.
It stops if OFF.
A 26.7
When product temperature increases by 2°C with
respect to SET 3B, the compressor starts up.
Similarly, high speed motor starts up until newly
reaching 3B.
Should button (10) "OFF" be mistakenly pressed
during cooling stage, press button (3) "ON" and
button (2) to continue cooling.
A 26.8
In order to extract product, open tap to liquid mix
position.
USER INSTRUCTIONS
37