A 7 Safety Devices - Promag CUOCICREMA Series User Instructions

STARCREM 30/1 INV
A 7 - SAFETY DEVICES
A 7.1
Three magnetic microswitches are mounted onto the
STARCREM machines (19) (20) (21).
Microswitch (19) is located on the front left-hand side
under the cylinder.
Microswitch (20) is located on the rear right-hand
side under the cylinder.
Microswitch (21) is located on the rear left-hand side
under the cylinder.
Their purpose is to block any machine operation
should the front half-lid [(microswitch (19)], motor
bearings [(microswitch (20)], rear half-lid
[(microswitch (21)], be opened or lifted with the
machine in operation.
GB
22
21
19
22
Blocking device for motor bearings
21
Rear left-hand microswitch
19 Front left-hand microswitch
12
- STARCREM 60/1 INV
USER INSTRUCTIONS
A 7.2
There is a machine stop button (7) located on the
control panel at the front of the machine which, when
pressed, stops any machine operation.
A 7.3
- 12 Volt control panel.
20 36
7
20
Rear right-hand microswitch
PROMAG