Electrical Warning; Fcc Statement; Conformity With European Regulations - Thermo Scientific Smart-Vue Installation Manual

Notices

Electrical warning

When using this device with an AC adapter (100-240V AC – 5V DC),
always use the specific adapter provided by your supplier (same brand, same
product reference). Do not open the adapter yourself and do not dismantle
internal components or modify them in any manner. The adapter does not
contain any user-reparable parts. If the adapter shows any sign of
malfunction, unplug it immediately and contact Thermo Fisher Scientific
for repair or replacement. Do not connect the adapter to a device or
peripheral other than the Thermo Scientific product for which it was
intended. Unplug the power cable from the electrical outlet when adapter is
not in use.
Do not cause a short-circuit with the electrical plug. Do not force either the
AC or DC plug. Before removing the connector from the Smart-Vue™
end-point module or unplugging power cables, first unplug the cable from
the power outlet. Do not subject adapter to physical shock, which could
cause serious malfunction or damage. Do not use or place the adapter in a
wet or humid location. This adapter is not waterproof.

FCC statement

This paragraph pertains to 915 MHz Smart-Vue™ wireless end-point
modules. This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation: FCC
Part 15 §107 - §109 - §207 - §247 (Ed 2008).
Conformity with
This paragraph pertains to 868 MHz Smart-Vue wireless end-point
modules. The CE mark on this product indicates that Thermo Fisher
European regulations
Scientific declares that this product is compliant with Radio equipment and
Telecommunications Terminal equipment (R&TTE) directive 1999/5/EC
and the Low Voltage Directive (LVD) 2006/95/EC. The following
standards were utilized to meet the essential requirements of these directives:
EN 301 489-3 v1.4.1 (02), EN 300 220-2 V2.1.2 (R&TTE) & EN
60950-1:2006/A11:2009 (LVD).
The most current EC Declaration of Conformity may be downloaded from
the Smart-Vue World Wide Web at www.thermoscientific.com/smart-vue
Caution: Any changes or modifications not expressly approved by Thermo
Fisher Scientific could void the user's authority to operate the equipment.
2 Smart-Vue CO and Temperature Module Installation Guide Thermo Fisher Scientific
2