Loading Paper In Trays 6 And 7 (High Capacity Feeder C1-Ds) - Fuji Xerox ApeosPort-VII C7788 Quick Reference

3 Paper and Other Media
4
Likewise, load the remaining paper and align the edges of the paper in the arrow direction
(1). Hold the short-side paper guide on the left side and slide it to the desired paper size (2).
Important
Do not load paper exceeding the maximum fill line. It might cause paper jams or device malfunctions.
If the number of sheets is 100 or less, the paper guides touch too tightly against the paper, causing the paper
to deform and resulting in paper jams.
Position the paper guides correctly to match the paper size. If the position of the guide is not correct, the
paper may not be fed properly, causing paper jams.
5
Push the tray in gently until it stops.
Important
When pushing the paper tray in, do it slowly. If the tray is pushed with too much force, it may cause device
malfunction.
6
Specify the type of the paper loaded when you have changed the paper type.
Reference
For more information on paper type settings, refer to "Changing the Paper Settings" (P.89).

Loading Paper in Trays 6 and 7 (High Capacity Feeder C1-DS)

The following describes the procedure for loading paper in Trays 6 and 7 (High Capacity
Feeder C1-DS (optional)).
Note
Before loading paper in a tray, fan the paper well. It prevents paper from sticking to each other and reduces
paper jams.
When loading heavyweight paper, be sure to adjust the position of the weight switch buttons.
1
Pull out the tray towards you until it stops.
Important
While the device is processing a job, do not pull out the tray.
76