Fuji Xerox ApeosPort-VII C7788 Quick Reference page 158

7 Problem Solving
3
Return the handle [1a] to the original position.
4
Close the front door of the High Capacity Feeder.
5
If the paper cannot be removed in step 2, open the top cover of Tray 5 (Bypass) and
remove the jammed paper and any paper loaded.
6
Close the top cover of Tray 5 (Bypass).
7
When two or more sheets of paper were loaded, jog the paper you removed making sure
that all four corners are neatly aligned.
8
Insert the paper into the tray with the printing side facing up until its leading edge lightly
comes up against the paper feed entrance.
Note
Do not load paper exceeding the maximum fill line. It might cause paper jams or device malfunctions.
158