Paper Jams In The 10-Bin Output Device - Fuji Xerox ApeosPort-VII C7788 Quick Reference

2
Turn the knob [4a] to the right to eject the jammed paper onto the booklet tray.
3
Remove the jammed paper.
Note
If paper is torn, check for any torn pieces of paper inside the device.
4
Close the finisher front door.
Note
If the finisher front door is not completely closed, a message will appear and the device remains paused.

Paper Jams in the 10-bin Output Device

The following describes how to clear paper jams inside the 10-bin output device when the
10-bin output device is installed to the C3 Finisher with Booklet Maker (optional).
1
If you can see the edge of the jammed paper from the 10-bin output device, gently pull the
paper straight from the exit area to remove.
Note
If paper is torn, check for any torn pieces of paper inside the device.
Paper Jams
187