Loading Paper In Tray 3 - Fuji Xerox ApeosPort-VII C7788 Quick Reference

3 Paper and Other Media
5
Push the tray in gently until it stops.
Important
When inserting the tray, push it gently. Forcibly pushing in the tray may cause device malfunction.
6
Specify the type of the paper loaded when you have changed the paper type.
Reference
For more information on paper type settings, refer to "Changing the Paper Settings" (P.89).

Loading Paper in Tray 3

The following describes the procedure for loading paper in Tray 3.
When the device runs out of paper during copying or printing, a message is displayed on
the touch screen. Add paper according to the displayed instructions. Copying or printing
automatically resumes when paper is added.
Note
Fan the paper well before loading paper in a tray. It prevents paper from sticking to each other and reduces
paper jams.
1
Pull out the tray until it stops.
Important
While the device is processing a job, do not pull out the tray that is being used for the job.
Do not add a new stack of paper on top of the remaining paper in the tray to prevent paper jams or any other
troubles. First, remove the remaining paper from the tray, and then load the new stack of paper.
2
Remove any paper loaded in the tray.
3
Pinch the paper guide and slide it to the desired paper size.
64