Fuji Xerox ApeosPort-VII C7788 Quick Reference page 95

Important
To avoid paper jams, use the document glass for folded or wrinkled documents, cut-and-pasted documents,
curled paper, or back carbon paper.
2-sided scanning of lightweight paper (38 - 49 gsm) is not supported.
Set the original documents at the upper-left corner so that the document size will be detected correctly.
A
ABC
Report
B
1
Remove any paper clips and staples before loading a document.
2
Load the document face up (when the document is 2-sided, place the front side up) in the
center of the document feeder.
Note
The Confirmation indicator lights up when the document is loaded correctly. If the indicator does not light,
the device may be detecting the document on the document glass. Load the document again.
Confirmation indicator
3
Adjust the document guides to match the size of the document loaded.
Loading Documents
95