Fitting The Fill-Level Control Sensor - Fronius Robacta Reamer V Easy Operating Instructions/Spare Parts List

Fitting the fill-lev-
1
1
el control sensor
1
2
3
62
(2) (2)
2
(3)
* *
Screw the installation adapter and sensor on to the parting agent container housing
* * * *
NOTE!
First press the upper part of the sensor
into the installation adapter as shown -
the sockets (1) on the installation adap-
(1)
ter must fit into the recesses (2) in the
sensor.
(1)
When the upper part of the sensor is pro-
perly lined up in the installation adapter,
press the sensor fully into the installation
adapter - the latch (3) on the installation ad-
apter must snap back over the sensor (sen-
sor audibly engages).
* Use the fixings supplied with the
sensor.
** Fixings are not included in the sen-
sor/installation adapter scope of
supply. The installer is responsible
for selecting the right type of fixing.
NOTE!
Ensure the fixings do not damage the
parting agent container.