Control Elements And Connections; Malfunction Indicator; Mains Switch - Fronius DPS 500 Operating Instructions Manual

Control elements and connections

Safety
Danger due to incorrect operation.
Operating the machine incorrectly can cause serious injury and damage.
► Do not use the functions described here until you have read and completely under-
Indicators,
switches and
connection
points
Front view of DPS 500
(1)
(2)
(3)
(4)
(5)
(6)
40
WARNING!
stood the whole of the "Operating Instructions" manual
(1) (2) (3)
Blanking cap

Malfunction indicator

glows until the interface has been initialised by the external control, and if a mal-
function has occurred during operation. The error messages displayed are de-
scribed in the section headed "Troubleshooting".
Robot-interface indicator
glows when the power source is "On", if e.g. a robot interface or field-bus coupler
is connected up to the LocalNet and there is a datalink to the interface.
Power source ON indicator
glows as long as the power source is connected up to the mains supply and the
mains switch is in the "I" position
"Operating instructions" symbol
Observe all the safety, operating, care and maintenance instructions in the "Oper-
ating instructions" manual!

Mains switch

for switching the power source on and off
(4) (5) (6)